Michael Gandy in Melbourne … update

In less than a week Michael Gandy will be speaking on the first of two days when Melburnians will be able to experience one of the best genealogical speakers in the world!

Important information about locations, access and bookings can be found on the Genealogical Society of Victoria blog.

Personally I’m looking forward to these presentations immensely – it’s not often that we get such a wonderful opportunity right here in Melbourne!

Michael Gandy: live in Melbourne

This is a wonderful opportunity for all family historians to experience one of the best genealogical speakers in the world!

Michael Gandy has been to Australia before but to hear him speak you would have had to attend an Australasian Congress held somewhere around Australia or New Zealand.  This would not have been cheap – taking into account transport, accommodation and Congress registration fees.  Now you have a chance to hear Michael give four presentations plus a Q&A session in Melbourne.

The Genealogical Society of Victoria web site includes details of Michael’s presentations and how to book for this great event on Saturday 10th November.

The start and end time have been chosen to enable family historians from country areas to travel to Melbourne, enjoy Michael’s presentations, and get back home again on the same day.

GG-Grandfather born in Estonia … NOT!

This has nothing to do with Geelong & District but a general tip on how family trees on the web can go horribly wrong.

Anyone who has done some serious family research knows that a large number of family trees you find on the internet are peppered with mistakes.  We know that we should never accept what we find on these trees but use them to do the research ourselves to see if there is valid information worth pursuing.

My maiden names is FUSSEN – unique in Australia and not that common around the world.  My first FUSSEN immigrant to Australia was my g-grandfather George FUSSEN.  According to Australian documents that I have – naturalisation papers, marriage certificates, birth certificates of children, and death certificate – he was born 19 May 1852 [or 1853] in Tours in France.  Despite several attempts I don’t yet have any European documentation to support his place of birth or the various stories passed down through the family.  These stories came from my late great aunt Mary who remembered a lot of what her mother (my g-grandfather’s youngest sister) told her.   I have been able to prove that some of these stories have been extremely accurate and therefore put a fair bit of faith in her memory.

Now and again I check ancestry.com to see if someone connected with my ancestors may have done some more research and found details I haven’t yet found.  Over the years the number of trees including my FUSSEN family has grown – some are submitted by cousins, descendants of George, but others are unknown people who appear to be based in Europe.  Oddly enough they all appear to have photographs direct from my family tree!

Yesterday I got my first “oh my gosh” moment!  George was the son of Peter FUSSEN and Francoise GENISE – according the family trees on Ancestry Peter FUSSEN was born in Estonia!  This totally threw me – my family tree on my web site [not Ancestry] is quite out-of-date and desperately needs some work on it [that is on the drawing board when I get a break from work at Christmas!].  According to my notes and research I believe that Peter FUSSEN was possibly from Switzerland – that’s some distance from Estonia.

I couldn’t resist searching these family trees further to try to find the source of the information about Estonia.  ALL of them had Estonia as Peter FUSSEN’s place of birth BUT there was one clue that eventually hit me like a sledge-hammer.  Two of the trees did NOT show Estonia as his place of birth in normal text but had (Estonia) in light grey – in other words this was a HINT from Ancestry and NOT data entered in this particular family tree.

The sledge-hammer?  I use abbreviated prefixes when I don’t have specific dates.

  • Abt = means I have found a year of an event in an index – if for example a birth was registered in 1890 I will enter this as Abt 1890 because although it was registered in 1890 the actual birth could have been late in 1889 and not registered until the following year.  The “Abt” is removed when I find the actual date.
  • Calc = means a date has been calculated from another event – if for example a death certificate stated an age, then a year of birth will be calculated from that.  If the age may not be accurate and conflicts with other events then I will prefix the year of birth with Calc.
  • Est = means that I have no idea of a date / year but use the standard 25 years for a generation to give me an idea of roughly when the event might have occurred.

Worked it out yet?

Either a human being or a computer decided that “Est” was an abbreviation for Estonia!  And of course everyone else just copied the information into their family tree!  No wonder there are so many errors floating around in the multitude of family trees out there!

At this stage I have absolutely NO evidence to suggest that my FUSSEN family came from Estonia – oh well, it was nice for a few moments to think that someone else had done some more research.  Roll on Christmas when I’ll have time to do a bit more and update my family tree.

Not that hard: visiting the Genealogical Society of Victoria

If you think that you need to be a member to visit the Genealogical Society of Victoria [GSV] hopefully this blog will encourage you to visit and find out the facts first hand.  The other misconception some people have is that the Society’s resources are limited to Victoria.  In fact the society has wonderful resources for researching ancestors from around the world.

Explore the web site of the GSV to find out all the details: opening times, services, activities, events, bookshop, catalogue and much more. 

This blog isn’t about repeating the information on the GSV web site – it’s aimed at making you feel comfortable about dropping in for a visit.

WHERE:

Level B1, 257 Collins Street, Melbourne

HOW TO FIND THE GSV:

The GSV is located in Emirates House on the south side of Collins Street between Swanston and Elizabeth Streets.  Australia on Collins is almost opposite and Emirates House is just a few doors towards Swanston Street from the pedestrian crossing lights.  [below left and centre]

Go through the sliding glass entrance doors of Emirates House.  [below right]

 
     

Once you are in the foyer, DON’T go past the escalators!  Turn LEFT immediately before the jewellers on the left – the lifts are behind the jeweller’s shop.  Press the DOWN button and when you’re in the lift select “B1″.  [below left]

Emirates House runs between Collins Street and Flinders Lane.  If you are coming from the Flinders Street Railway Station, you can enter the building at rear – 257 Flinders Lane.  [below centre]

When you come out of the lift at level B1 you will see the GSV sign in the foyer.  [below right]

 
     

WHAT YOU’LL FIND AT THE GSV:

Turn left down the corridor – and pause to look at the wonderful family charts on the wall.  There are also photos of all the GSV’s presidents.  [below left]

At the end of the corridor is reception and the bookshop.  Allow plenty of time to browse the wonderful selection of books, CDs, charts, genealogy programs, vouchers and much more.  Have a look at the online GSV bookshop to get an idea of the huge range available … and if what you want is not in stock the GSV may be able to get it in for you.  [below right]

 
   

USING THE LIBRARY:

Prospective members may have a brief tour of the library if the staff or volunteers are available.You do not need to be a member of the GSV to use the library – there are day rates and also reciprocal rights for members of nominated interstate societies.  Ask at the reception desk to check the options for you.

Visitors and members are required to wear their name tags or membership cards at all times in the library. 

No bags are permitted in the library – these should be placed in one of the lockers provided.  Clear plastic bags are permitted for your research papers.

Only pencils are permitted in the library – if you don’t have one, you can borrow one from the library information desk.

Members should scan the barcode on their card when they first arrive at the library and at the end of the day when they leave.  [below left and right]

 
 

 

LIBRARY FACILITIES and RESOURCES:

The information and enquiry desk is the first point of call – this is where you book computers and film readers, ask for assistance and advice on using the catalogue and doing your research, and collect your printing and copying.  [below left]

Bookings must be made for using the computers and film readers as there are time limits and specific machines are allocated depending on your area and type of research.  [below centre and right]

All monitors have been upgraded to flat screens providing greater desk-space for everyone.  [below right]

 
     

You will also need to book microfilm readers and should check with the information desk on procedures for using microfiche.  [below left]

Many resources are still available on microfiche and microfilm and the GSV holds an extensive collection.  [below centre]

In addition to the film printer, the GSV has a Scanpro film and fiche scanner and printer – digital images can also be saved to USB drives from this equipment.  Check with the information desk to book the Scanpro for short-term use.  [below right]

 
     

OTHER FACILITIES:

The GSV meeting room is used for the Thursday lunchtime talks, computer classes, courses and various special interest groups.  It includes full data projection and audio equipment.  Check the GSV web site for information on all activities.  [below left]

You can plan a full day at the GSV – bring your own lunch or make use of the numerous food outlets nearby.  There is a kitchen with tea & coffee making facilities.  Relax and chat with other library users in the lunch area.  [below right]

 
 

 

There is so much to see and do at the Genealogical Society of Victoria – don’t be afraid to visit and find out what you’re missing!

Follow

Get every new post delivered to your Inbox.

Join 249 other followers